Event Master Toolset
7.1 EMTS GUI: Configuration menu
Description
The Configuration menu, shown in the following illustration, is the first page you see when you access the
ImagePRO–4K from the EMTS GUI.
Image 7-1: EMTS GUI orientation
1.
Menu navigation bar – The menu navigation
bar allows the user to choose from among the
available menus: Configuration, Programming,
Cue, Multiviewer, Controller, or Settings.
2.
Title bar – The title bar shows the current menu
and the currently selected system.
3.
Selection area – The selection area contains
tabs for "Discovered" systems and systems "In
use." It also contains a field for entering IP
addresses and a button for adding systems.
102
R5906167 /00
ImagePRO–4K Video Processor
4.
Diagram area – The diagram area contains
graphic representations of the system in use.
5.
Modifier area – The modifier area contains
system controls, such as Native Rate and
Genlock status.
6.
Configuration area — The Configuration area
contains tabs and panels on which users perform
all needed adjustments. This area is largely
empty until the user selects an item from the
Diagram area.