Table of Contents
Advertisement
Image 6-25: Output (Aux): Output Mapping
3.
Turn the adjust knob to scroll to either ChannelA or ChannelB.
4.
Press the adjust knob to select the desired channel.
5.
Repeat steps 2 through 4 for any desired output.
Primary Output
1.
Scroll to and select Primary Output to view and adjust the primary output.
Once the Primary Output is selected, the highlight bar turns from gray to cyan.
Image 6-26: Output (Aux): Primary Output
2.
Turn the adjust knob to scroll through the outputs.
3.
Press the adjust knob to select the desired output.
SDI Setup
1.
Scroll to and select SDI Setup on the Output (Aux) menu to set up the SDI outputs.
SDI may be set up in two configurations:
•
Four separate SDI outputs.
If four separate outputs are created, each of the outputs can be individually configured to either Level A
or Level B.
•
A single Quad SDI output.
If a single quad SDI output is created, that output can be configured to either Level A or Level B.
2.
Scroll to and select Make Separate SDI Outputs.
R5906167 /00
ImagePRO–4K Video Processor
Menu orientation
51
Advertisement
Table of Contents
