Table of Contents
Advertisement
•
Gamma – Range: 0.30 to 3.30; Default: 1.00
•
Saturation – Range: 0 to 150: Default: 100
•
Reset returns the color adjustments to their initial settings.
7.
Scroll to and select Window Pan/Zoom to view or adjust panning and zooming options.
Scaling Mode can be set to All, Center Cut, or Custom. For custom configurations, other adjustments
can be made.
•
Zoom H zooms in or out on the horizontal center of the image.
Increasing this setting "stretches" the image to the right and left along the horizontal plane. Decreasing
this setting brings the right and left edges in toward the center of the active area.
•
Zoom V zooms in or out on the vertical center of the image.
Increasing this setting "stretches" the image up and down along the vertical plane. Decreasing this
setting brings the top and bottom edges in toward the center of the active area.
•
Zoom H/V adjusts both horizontal and vertical zoom settings at the same time.
•
Pan H moves the image to the left or right.
You can adjust Pan settings only after adjusting Zoom settings.
•
Pan V moves the image up or down.
You can adjust Pan settings only after adjusting Zoom settings.
•
Match Input 1:1 fills the AOI with the unscaled input image.
If you created an Area of Interest that is smaller than the default active area for the input, a portion of
the image is not displayed. You can then use the Pan settings to display the portion of the image you
want to show.
•
Match Program matches the selected view in PVW to its corresponding layer in PGM.
•
Reset restores the default settings.
8.
Scroll to and select Mask to view or adjust masking options.
Scaling Mode can be set to All, Center Cut, or Custom. For custom configurations, other adjustments
can be made.
Custom Mask values are given in percentages, and range from 0% to 100%. The default mask value is
0%.
•
Left masks the left edge of an image.
•
Right masks the right edge of an image.
•
Top masks the top of an image.
•
Bottom masks the bottom of an image.
•
Reset restores the default settings.
9.
Scroll to and select Matte Color to view or adjust the matte-color options.
•
Red – Range: 0 to 1023; default is 0.
•
Green – Range: 0 to 1023; default is 0.
•
Blue – Range: 0 to 1023; default is 0.
10.
Scroll to and select Timing Adjustment to view and adjust the output timing options.
Note that users should be familiar with how the adjustments they are making may affect the video format.
The user should use a timing calculator to determine the correct numbers for timing. Incorrect settings can
cause unstable or asynchronous video output.
•
H Total: Total pixel count per line.
•
H Front Porch: The offset between the end of the active area and the beginning of H sync.
•
H Active: The horizontal size in pixels of the active area.
•
H Sync: H sync width in pixels.
•
V Total: Total line count per frame.
•
V Front Porch: The offset in lines between the end of the output active area and the beginning of V
sync.
•
V Active: The vertical size of the output active area.
•
V Sync: V sync width in lines.
•
V Rate: Vertical frame rate in frames per second.
•
Save as Custom Format saves the custom format, which can now be chosen from the Aux
Adjustment > Format menu.
11.
Scroll to and select HDCP to set up and apply HDCP settings for the input.
The default HDCP mode setting for DisplayPort, DVI, and HDMI is Off. HDCP Mode is not applicable to
SDI inputs.
R5906167 /00
ImagePRO–4K Video Processor
Menu orientation
49
Advertisement
Table of Contents
