System menu tree
Refer to Image 6-64 and to Image 6-65 for an illustration of the System menu tree.
Image 6-64: System menu tree
Image 6-65: System menu tree (Continued)
Unit Mode
The ImagePRO–4K video processor can operate in one of three unit modes.
•
In Standard Program mode, when the operator selects a source from the front panel that source is
automatically transitioned to both Aux outputs.
•
In Standard Preview mode the operator can preview the input on the Display screen, before taking it to
program by pressing the Take button.
Note that to preview the selected input on the display screen, the MENU/MON menu key must be set to
monitor mode.
•
In Matrix Preview mode the ImagePRO–4K video processor acts as if it were a scaling matrix switcher.
Matrix Preview mode may be selected from the front panel of the unit, but it must be used through the
EMTS GUI.
Standard Program and Standard Preview modes allow for a single input to route to up two Aux channels out.
Because only one source is routed to both Aux channels at the same time, all six inputs can have a 4K60p
R5906167 /00
ImagePRO–4K Video Processor
Menu orientation
69