Table of Contents
Advertisement
2.
Use the adjust knob to scroll to and select either On or Off.
If Black on Invalid Video is set to Off, unpredictable output may result.
Native Rate
Native Rate allows the operator to adjust the native rate of the system.
1.
Select Native Rate on the System menu.
Once Black on Invalid Video is selected, the highlight bar turns from gray to cyan.
Image 6-68: System menu: Native Rate
2.
Scroll through and select from among the native rate options.
The native rate of the system is measured in Hz (cycles per second). Available selections are:
23.98
47.95
24.00
48.00
25.00
50.00
29.97
59.94
30.00
60.00
The native rate must match the general frame rate in the event where the unit is used.
Genlock
Genlock allows the operator to adjust the Genlock parameters of the system.
1.
Select Genlock on the System menu.
R5906167 /00
ImagePRO–4K Video Processor
Menu orientation
71
Advertisement
Table of Contents
