Table of Contents
Advertisement
READ BEFORE BEGINNING INSTALLATION/PROGRAMMING/SET-UP
SAFETY
CAUTION!
Use of controls, adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Do not look into the laser emitter
or the visible red laser beams.
INSTALLATION AND MAINTENANCE
Avoid extreme vibrations.
Avoid
exposure
to
sudden and extreme
temperature changes.
Page 2 of 12
Page 2 of 12
The
warranty
is
unauthorized repairs are made
or attempted by unauthorized
personnel.
Do not cover the front
screens.
Avoid direct exposure to
high pressure cleaning.
The device contains IR and visible laser diodes.
IR laser: wavelength 905nm; max. output pulse power 75W
(Class 1 according to IEC 60825-1)
Visible laser: wavelength 650nm; max. output CW power 3mW
(Class 3R according to IEC 60825-1)
The visible laser beams are inactive during normal operation.
The installer can activate the visible lasers if needed.
void
if
Only
trained
personnel are recommended to
install and set up the sensor.
Avoid moving objects
and light sources in the
detection field.
Do not use aggressive
products to clean
the front screens.
and
qualified
Test the proper operation of
the installation before leaving
the premises.
Avoid the presence of
smoke and fog in the
detection field.
Wipe the front screens
regularly with a clean
and damp cloth.
75.5792.05 LZR-S600 20180814
75.5792.05 LZR-S600 20180814
Avoid condensation.
Keep
the
sensor
permanently powered in
environments where the
temperature can descend
below 32 °F.
Advertisement
Table of Contents
