Installation And Maintenance - BEA LZR-H110 User Manual

SAFETY
CAUTION!
Use of controls, adjustments, or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not look into the laser
emitter or the visible red
laser beams.
This sensor is designed to be used as a movement and presence detector to initiate the opening and the closing
process of a gate or a barrier. Other use of the device, especially on industrial doors, is outside the permitted purpose
and cannot be guaranteed by the manufacturer and might infringe the following patent application EP 1 470 314 B1.
The manufacturer of the system is responsible for installing the sensor and the system in compliance with applicable
national and international regulations and standards on safety and if applicable, the machinery directive 2006/42/EC.
The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate adjustments of
the sensor.

INSTALLATION AND MAINTENANCE

Avoid extreme
vibrations.
Avoid exposure to
sudden and extreme
temperature changes.
Page 2 of 12 Page 2 of 12
The warranty is void if
unauthorized repairs are
made or attempted by
unauthorized personnel.
Do not cover
the front screens.
Avoid direct exposure
to high pressure
cleaning.
The device contains IR and visible laser diodes.
IR laser: wavelength 905nm; max. output pulse power 75W
(Class 1 according to IEC 60825-1)
Visible laser: wavelength 650nm; max. output CW power 3mW
(Class 3R according to IEC 60825-1)
The visible laser beams are inactive during normal functioning.
The installer can activate the visible lasers if needed.
Only trained and qualified
personnel are recommended
to install and set up the
sensor.
Avoid moving objects
and light sources in
the detection field.
Do not use aggressive
products to clean
the front screens.
After installation, enter an
access code by remote
control.
Avoid the presence Avoid condensation.
of smoke and fog in
the detection field.
Wipe the front Keep the sensor
screens regularly permanently powered
with a clean and in environments where
damp cloth. the temperature can
descend below 0°C.
75.5897.02 LZR-H110 20170821 75.5897.02 LZR-H110 20170821