Table of Contents
Advertisement
READ BEFORE BEGINNING INSTALLATION/PROGRAMMING/SET-UP
SAFETY
CAUTION!
Use of controls, adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Do not look into the laser
emitter or the visible red laser
beams.
INSTALLATION AND MAINTENANCE
Avoid extreme vibrations.
Avoid exposure to
sudden and extreme
temperature changes.
Page 2 of 12
Page 2 of 12
The device emits invisible (IR) and visible laser radiation.
The visible laser beams are inactive during normal operation.
The installer can activate the visible lasers if needed.
Do not stare into visible laser beams.
The warranty is void if
unauthorized repairs are made
or attempted by unauthorized
personnel.
Do not cover the laser
windows.
Avoid direct exposure to
high pressure cleaning.
IR laser: wavelength 905nm; output power 0.10mW
(Class 1 according to IEC 60825-1)
Visible laser: wavelength 635nm; output power 0.95mW
(Class 2 according to IEC 60825-1)
Only trained and qualified
personnel are recommended to
install and set up the sensor.
Avoid moving objects
and light sources in front
of the laser window.
Do not use aggressive
products to clean the
laser windows.
Test the proper operation
of the installation before
leaving the premises.
Avoid the presence of
Avoid condensation on
smoke and fog in the
the laser windows.
detection field.
Clean the laser window
with compressed air. If
needed, wipe only with
a soft, clean and damp
microfibre cloth.
75.5667.11 LZR-I30 20191125
75.5667.11 LZR-I30 20191125
Keep the sensor
permanently powered in
environments where the
temperature can drop
below 35 °F.
Advertisement
Table of Contents
