Compact laser scanner for presence detection of platform screen doors (13 pages)
Summary of Contents for BEA LZR-s600
Page 1
-s600 ® LASER SCANNER FOR BUILDING AUTOMATION & SECURITY with max. detection range of 82 ft x 82 ft User’s Guide 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814 Page 1 of 12 Page 1 of 12...
This can be useful in cases where the sensor should not draw any attention. SYMBOLS Possible Remote control Caution! remote control sequence Laser radiation adjustments Factory values Alarm Quick installation 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814 Page 3 of 12 Page 3 of 12...
30 minutes after last use, the sensor locks access to the remote control session. To regain access, cycle the power. The remote control session will then be accessible for another 30 minutes. 30’ Page 4 of 12 Page 4 of 12 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814...
2 (intrusion alarm). Adapt the field width of field 1 (ex: 20 ft): Adapt the field width of field 2 (ex: 25 ft): 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814 Page 5 of 12 Page 5 of 12...
Page 6
Learn is to be (no polarity) performed (minimum of 1 millisecond). No Learn via input: connect orange and orange/black wires to ground/ common Page 6 of 12 Page 6 of 12 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814...
Page 7
No reference point is memorized. reference point and signals a fault No alarm in case of interference. when its orientation is changed (observe orange flashing LED). 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814 Page 7 of 12 Page 7 of 12...
Page 8
To launch a Learn via remote control, use the following sequence: max. 30 s Wait for the sensor to learn its environment or lock it by remote control. green Page 8 of 12 Page 8 of 12 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814...
Page 9
R1 R2 NO = normally open P – NC A – NO P – NC A – NO NC = normally closed R = relay output 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814 Page 9 of 12 Page 9 of 12...
Access code needs entered or Cut and restore power supply. No code is required to unlock during the an incorrect code was used first minute after powering. Page 10 of 12 Page 10 of 12 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814...
EN 61000-6-2:2005 Norm conformity: 2002/95/EC: RoHS EN 60529:2001 EN 60950-1:2005 EN 61000-6-3:2006 Specifications are subject to change without prior notice. All values measured in specific conditions. 75.5792.05 LZR-S600 20180814 75.5792.05 LZR-S600 20180814 Page 11 of 12 Page 11 of 12...
Page 12
BEA ne garantit aucun usage du capteur en dehors de son but prévu. BEA recommande fortement que les techniciens d’installation et de services soient certifi és AAADM pour les portes piétonnières, certifi és IDA pour les portes/portails, et formés en usine pour le type de système de portes/portails.