Connect A Bluetooth Device; Rename A Bluetooth Device - Cisco 8821 User Manual

Access Bluetooth Settings
The phone searches for any Bluetooth devices in range. This scan can take a couple of minutes.
Step 5
Select a device from the list and press Pair.
Step 6
(Optional) Enter the passkey for the device.

Connect a Bluetooth Device

After you pair and connect a Bluetooth device to your phone, the device automatically connects when it is
turned on and close to your phone. Only one Bluetooth device can be connected to the phone. But, if you have
two Bluetooth devices turned on, the phone uses the most recently connected device. You can change which
device the phone uses.
Before You Begin
Bluetooth must be turned on and the device needs to be already added to the Bluetooth device list.
Procedure
Step 1
Access the Settings app.
Step 2
Select Bluetooth.
Step 3
Select a device from the list.
Step 4
Press More

Rename a Bluetooth Device

Procedure
Step 1
Access the Settings app.
Step 2
Select Bluetooth.
Step 3
Select a device from the list.
Step 4
Press More
Cisco Wireless IP Phone 8821 and 8821EX User Guide
68
and select Connect.
and select Rename.
Settings