Set The Username And Password - Cisco 8821 User Manual

Set the Username and Password

Procedure
Step 1
Access the Settings app.
Step 2
Select Wi-Fi.
Step 3
Select a profile.
Step 4
Select Network configuration > IPv4
Step 5
Select Alternate TFTP and set to On.
Step 6
Select TFTP Server 1 and enter the TFTP IP address for the Cisco Unified Communications Manager.
Step 7
Press More
Step 8
In the Trust list window, press More and select Erase.
Step 9
Exit to the home screen.
The phone connects to the Cisco Unified Communications Manager. After the connection is made, the phone
downloads the configuration file and, if necessary, upgrades the firmware to a new firmware load.
Set the Username and Password
When you power on your phone for the first time in some networks, you may need to set your username and
password to access the wireless network. Contact your administrator for assistance.
Procedure
Step 1
From the home screen, select Settings.
Step 2
Select Wi-Fi.
Step 3
Select a profile.
Step 4
Select WLAN configuration.
Step 5
Select Username or Password.
Step 6
Enter your username or password in the New Username or New Password field.
Note
Step 7
Press More
Step 8
Press Power/End Call
Related Topics
Sign In to Your Phone, on page 3
Cisco Wireless IP Phone 8821 and 8821EX User Guide
22
and select Set.
You can use up to 32 alphanumeric characters for the
password.
and select Save.
.
Phone Setup