Setting Recording Conditions - Sanyo DSR-3716 Instruction Manual

e00_l8hbg_us_7.book Page 67 Thursday, November 25, 2004 1:44 PM
3 RECORD SET
2
Turn the jog dial to select "2.
RECORDING AREA SET" from the
<RECORD SET> screen, and then turn
the shuttle dial clockwise.
The <RECORDING AREA SET> screen is displayed.
3
Turn the jog dial to select "AREA FULL
RESET", and then turn the shuttle dial
clockwise.
"NO" on the <WARNING> screen flashes.
Flashing
4
Turn the jog dial to select "YES", and
then turn the shuttle dial clockwise.
"NORMAL RECORDING AREA" is set to overwrite once.
5
Use the same procedure to make
settings for the "ALARM RECORDING
AREA".
6
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT/OSD
English
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
<WARNING>
AREA FULL RESET
ARCHIVE AREA
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
67
To perform overwriting automatically, set
"OVERWRITE" for either "NORMAL RECORDING
AREA" or "ALARM RECORDING AREA" from
<RECORDING CONDITIONS SET> screen to "ON".
P.67)
(
Whenever "AREA FULL RESET" is performed for
"NORMAL RECORDING AREA" or "ALARM
RECORDING AREA", the video recorded in the
corresponding area will be overwritten.
Images in the archive area are erased when "AREA
FULL RESET" is performed for the archive area.

Setting recording conditions

Use the following setting procedure to indicate whether
overwriting is to be performed (deleting old video) or
recording is to be stopped when any of the hard disk's
recording areas become full.
Setting overwriting for the normal recording
area
1
Turn the jog dial to select
"OVERWRITE" for normal recording
area, and then turn the shuttle dial
clockwise.
"ON" flashes.
NORMAL RECORDING AREA
ALARM RECORDING AREA
REMAINING DISK WARNING
SERIES REC
AUTO DELETE
<RECORDING CONDITIONS SET>
OVERWRITE : ON
OVERWRITE : ON
: **
: OFF
: OFF