INVT iMars Operation Manual page 46

iMars grid-tied solar inverters
Setting item
User period
LCD display
U s e r P e r i o d
S t a r t : 2 0 1 2 - 0 1 - 0 1 1
E n d : 2 0 1 2 - 0 2 - 0 1
mode" is the parallel MPPT of Track A
and Track B.
The default mode is "independent".
The input mode setting is invisible if the
inverter is in power generation. It is only
available during DC power on and AC
power off.
Press " " or "
mode and press "ENT" to save the
setting or "ESC" to return.
If the situation of section 6.4.8 occurs, it
is necessary to switch the DC input to
"parallel" mode.
Enter into the interface and edit the user
period through "
press "ENT" again to the next bit. After
editing, press "ENT" to save the edition
and press "ESC" to exit.
Of which, the setting time and date
needs to be later than the system
setting, and the start time needs to be
earlier than the end time.
The setting date and time is used for the
statistical information.
44
Display panel
Instruction
" to select the setting
" or " ". And then