Do you have a question about the iMars and is the answer not in the manual?
Questions and answers
razafinimanana andre joseph
April 16, 2025
Hi, i've got a new INVT XG30KTR from China and i cant sart it , how i have to do , do i need something eslse like USB or anything else with it
2 comments:
Mr. Anderson
April 16, 2025
To start the INVT XG30KTR inverter:
1. Disconnect the DC and AC side circuit breakers before wiring. 2. Wait at least 5 minutes after disconnecting before performing any wiring or checks. 3. Ensure the inverter is reliably grounded. 4. Power on the inverter using DC input. 5. On first startup or after restoring factory settings, select the country on the LCD screen.
You do not need a USB to start the inverter. All initial setup is done using the LCD screen and buttons.
This answer is automatically generated
razafinimanana andre joseph
April 21, 2025
@Mr. Anderson
razafinimanana andre joseph
April 28, 2025
je vous envoie l'image du LCD
razafinimanana andre joseph
April 28, 2025
voici l'autre image
razafinimanana andre joseph
April 28, 2025
Bonjour, ça ne marche pas toujours voila ce que le LCD montre : RUNNING ERROR; GRID EN 50549; FAULT 31-03; F 31-03 , je vous met en photo l'ecran
Need help?
Do you have a question about the iMars and is the answer not in the manual?
Questions and answers
Hi, i've got a new INVT XG30KTR from China and i cant sart it , how i have to do , do i need something eslse like USB or anything else with it
To start the INVT XG30KTR inverter:
1. Disconnect the DC and AC side circuit breakers before wiring.
2. Wait at least 5 minutes after disconnecting before performing any wiring or checks.
3. Ensure the inverter is reliably grounded.
4. Power on the inverter using DC input.
5. On first startup or after restoring factory settings, select the country on the LCD screen.
You do not need a USB to start the inverter. All initial setup is done using the LCD screen and buttons.
This answer is automatically generated
@Mr. Anderson
je vous envoie l'image du LCD
voici l'autre image
Bonjour, ça ne marche pas toujours voila ce que le LCD montre : RUNNING ERROR; GRID EN 50549; FAULT 31-03; F 31-03 , je vous met en photo l'ecran