Table of Contents
Advertisement
iMars grid-tied solar inverters
Icons
Instruction
2.4 Products modules
Table 2-2 Models of iMars grid-tied solar inverter
Product name
Single-phase (L, N, PE)
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Single-phase grid-tied solar inverter
Note: The technical parameters of grid-tied solar inverter refer to the appendix.
TUV certification mark. The inverter is certified by TUV.
CE certification mark. The inverter complies with the CE directive.
CQC certification mark. The inverter is certified by CQC.
EU WEEE mark. Cannot dispose of the inverter as household waste.
Model
iMars MG750TL
iMars MG1KTL
iMars MG1K5TL
IMars MG2KTL
iMars MG3KTL
iMars MG4KTL
iMars MG4K6TL
iMars MG5KTL
iMars MG3KTL-2M
iMars MG4KTL-2M
iMars MG4K6TL-2M
iMars MG5KTL-2M
iMars MG6KTL-2M
14
Product overview
Rated output power
750
1000
1500
2000
3000
4000
4600
5000
3000
4000
4600
5000
6000
- Quick Links:
- Faults
- Monitoring Communication
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iMars and is the answer not in the manual?
Questions and answers
Hi, i've got a new INVT XG30KTR from China and i cant sart it , how i have to do , do i need something eslse like USB or anything else with it
To start the INVT XG30KTR inverter:
1. Disconnect the DC and AC side circuit breakers before wiring.
2. Wait at least 5 minutes after disconnecting before performing any wiring or checks.
3. Ensure the inverter is reliably grounded.
4. Power on the inverter using DC input.
5. On first startup or after restoring factory settings, select the country on the LCD screen.
You do not need a USB to start the inverter. All initial setup is done using the LCD screen and buttons.
This answer is automatically generated
@Mr. Anderson
je vous envoie l'image du LCD
voici l'autre image
Bonjour, ça ne marche pas toujours voila ce que le LCD montre : RUNNING ERROR; GRID EN 50549; FAULT 31-03; F 31-03 , je vous met en photo l'ecran
The error message "RUNNING ERROR; GRID EN 50549; FAULT 31-03; F 31-03" refers to a grid-related fault according to the EN 50549 standard. It indicates the inverter has detected a fault condition related to grid parameters that do not comply with the required standard, such as voltage, frequency, or other grid quality issues. The specific fault code "31-03" is not detailed in the provided context, so the exact cause cannot be determined.
This answer is automatically generated