Lka Operation - Hyundai Kona Electric 2018 Owner's Manual

Hide thumbs Also See for Kona Electric 2018:
Table of Contents

Advertisement

Driving your vehicle
The
system
detects
markers (or road edge) and
controls the steering wheel by
a camera, therefore, if the lane
markers (or road edge) are
hard to detect, the system
may not work properly.
Please refer to "Limitations of
the system".
Do not remove or damage the
related parts of LKA system.
You may not hear a warning
sound of LKA system because
of excessive audio sound.
If any other warning sound
such as seat belt warning
chime is already generated,
the
Lane
Keeping
(LKA) system warning may
not sound.
Do not place objects on the
dashboard that reflects light
such as mirrors, white paper,
etc. The system may malfunc-
tion if the sunlight is reflected.
5-102
lane
The steering wheel is not con-
tinuously controlled so if the
vehicle speed is at a higher
rate when leaving a lane (or
road) the vehicle may not be
controlled by the system. The
driver must always follow the
speed limit when using the
system.
If you attach objects to the
steering wheel, the system
may not assist steering or the
hands off alarm may not work
properly.
When you tow a trailer, make
sure that you turn off the LKA
system.
Assist

LKA operation

To activate/deactivate the LKA sys-
tem:
With the POWER button in the ON
position, press the LKA system
switch located on the instrument
panel on the left hand side of the
steering wheel. (Right hand side of
the steering wheel for RHD vehicles.)
The indicator in the cluster display
will initially illuminate white. This indi-
cates the LKA system is in the
READY but NOT ENABLED state.
OOSEV058069

Advertisement

Table of Contents
loading

Table of Contents