Hyundai Kona Electric 2018 Owner's Manual page 538

3. Remove the bulb cover by turning
it counterclockwise.
4. Remove the bulb socket from the
headlamp assembly by turning it
counterclockwise
5. Disconnect the bulb socket-con-
nector.
6. Reinstall in the reverse order of
removal.
WARNING
•
Handle halogen bulbs with
care. Halogen bulbs contain
pressurized gas that will pro-
duce flying pieces of glass
that could cause injuries if
broken.
•
Wear eye protection when
changing a bulb. Allow the
bulb to cool down before han-
dling it.
• Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.
• Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit.
• A bulb should be operated only
when installed in a headlamp.
• If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
OIG076039
Daytime running light (DRL)/
Position lamp
If the lamp (LED) does not operate, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the LED lamp, for it may dam-
age related parts of the vehicle.
7
7-59