Table of Contents
Advertisement
Driving your vehicle
Smart Recuperation System
will be temporarily cancelled
when:
• Cancelled manually
Pulling and holding the right side
paddle shifter for more than 1 sec-
ond.
The Smart Recuperation System
turns off temporarily and AUTO for
the regenerative braking level dis-
appears from the cluster.
• Cancelled automatically
- The vehicle is shifted to N
(Neutral), R (Reverse) or P
(Park).
- The
Cruise
Control
(including the Smart Cruise
Control system) is in activation.
- The ESC (Electronic Stability
Control) or ABS is operating.
5-24
WARNING
When the Smart Recuperation
System is cancelled automati-
cally, adjust the vehicle speed
directly
by
accelerator or brake pedal
according to the road condition
ahead and driving condition.
To resume Smart
Recuperation System
To re-activate the Smart Recuperation
System while driving, pull and hold the
right side paddle shifter for more than
System
1 second again. Then, AUTO for the
regenerative braking level will appear
on the cluster.
To turn Smart Recuperation
System off
To turn off the system, shift to P
(Park) and deselect 'User settings →
Convenience → Smart recuperation'
on the User Settings mode.
Vehicle-to-Vehicle Distance
recognition sensor
(Front radar)
In order for the Smart Recuperation
System to operate properly, always
make sure the radar sensor cover is
depressing
the
clean and free of dirt, snow, and
debris. Dirt, snow, or foreign sub-
stances on the lens may adversely
affect the sensing performance of
the sensor. In this case, the system
operation may stop temporarily and
not operate normally.
•
•
CAUTION
Do not apply license plate
frame or foreign objects such
as a bumper sticker or a
bumper guard near the radar
sensor. Doing so may adverse-
ly affect the sensing perform-
ance of the radar.
Always keep the radar sensor
and lens cover clean and free
of dirt and debris.
Advertisement
Chapters
Table of Contents
