Light Bulbs - Hyundai Kona Electric 2018 Owner's Manual

LIGHT BULBS

Consult an authorized HYUNDAI
dealer to replace most vehicle light
bulbs. It is difficult to replace vehicle
light bulbs because other parts of the
vehicle must be removed before you
can get to the bulb. This is especially
true for removing the headlamp
assembly to get to the bulb(s).
Removing/installing the headlamp
assembly can result in damage to
the vehicle.
WARNING
•
Prior to working on a light,
depress the foot brake, shift
to P (Park), apply the parking
brake, place the POWER but-
ton in the OFF position and
take the key with you when
leaving the vehicle to avoid
sudden movement of the vehi-
cle and to prevent possible
electric shock.
•
Be aware the bulbs may be
hot and may burn your fin-
gers.
NOTICE
Be sure to replace the burned-out
bulb with one of the same wattage
rating. Otherwise, it may cause
damage to the fuse or electrical
wiring system.
i
Information
After heavy driving rain or washing,
the lamps could appear frosty. This
condition is caused by the tempera-
ture difference between the lamp
inside and the outside temperature.
This is similar to the condensation on
your windows inside your vehicle
when raining and doesn't indicate a
problem with your vehicle. If the
water leaks into the light bulb circuit-
ry, have your vehicle checked by an
authorized HYUNDAI dealer.
i
Information
• A normally functioning lamp may
flicker momentarily to stabilize the
vehicle's electrical control system.
However, if the lamp goes out after
flickering momentarily, or contin-
ues to flicker, we recommend the
system be checked by an authorized
HYUNDAI dealer.
• The position lamp may not turn on
when the position lamp switch is
turned on, but the position lamp
and headlamp switch may turn on
when the headlamp switch is turned
on. This may be caused by network
failure or vehicle electrical control
system malfunction. If this occurs,
we recommend the system be
checked by an
HYUNDAI dealer.
authorized
7
7-57