Hyundai Kona Electric 2018 Owner's Manual page 545

Hide thumbs Also See for Kona Electric 2018:

Table of Contents

Headlamp low beam (RHD side)

■ Based on 10m screen

1. Turn the low beam on without driver aboard.

2. The cut-off line should be projected in the cut-off line shown in the picture.

3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

4. If headlamp leveling device is equipped, adjust the head lamp leveling device switch to "0".

Chapters

Table of Contents