Detecting Sensor - Hyundai Kona Electric 2018 Owner's Manual

Hide thumbs Also See for Kona Electric 2018:
Table of Contents

Advertisement

Driving your vehicle
NOTICE
• The system may not work prop-
erly when the bumper has been
damaged, or if the rear bumper
has been replaced or repaired.
• The sensing range differs some-
what according to the width of
the road. When the road is nar-
row, the system may detect
other vehicles in the next lane
OR when the road is wide, the
system may not detect other
vehicles in the next lane.
• The system may turn off due to
strong electromagnetic waves.
5-82

Detecting sensor

The sensors are located inside the
rear bumper.
Always keep the rear bumper clean
for proper operation of the system.
Warning message
OOSEV058034
BCW (Blind-Spot Collision
Warning) system disabled.
Radar blocked
• This warning message may appear
when :
- One or both of the sensors on the
rear bumper is blocked by dirt or
snow or a foreign object.
- Driving in rural areas where the
BCW sensor does not detect
another vehicle for an extended
period of time.
- When there is inclement weather
such as heavy snow or rain.
OOSEV058035L

Advertisement

Table of Contents
loading

Table of Contents