Rear Cross-Traffic Collision Warning (Rccw) - Hyundai Kona Electric 2018 Owner's Manual

Hide thumbs Also See for Kona Electric 2018:
Table of Contents

Advertisement

Driving your vehicle
Rear Cross-Traffic Collision
Warning (RCCW) (if equipped)
The Rear Cross-Traffic Collision
Warning (RCCW) function monitors
approaching cross traffic from the left
and right side of the vehicle when
your vehicle is in reverse.
Operating conditions
To operate:
Go to the 'User settings → Driver
assistance' and select 'RCCW (Rear
Cross-Traffic Collision Warning)' on
the LCD display.
The system will turn on and standby
to activate. If you deactivate this
function in the cluster, the system will
stop.
Refer to "User Settings mode" in
chapter 3 for more details.
5-80
• If the vehicle is turned off and on
again, the RCCW system will
return to the state right before the
vehicle was turned off. Turn the
RCCW system off when not in use.
• The system will activate when
vehicle speed is below 10 km/h
(6.2 mph) and with the gear shifted
to R (Reverse).
• The Rear Cross-Traffic Collision
warning detecting range is approx-
imately 0.5 m ~ 20 m (1 ft ~ 65 ft)
in the direction of both lateral sides
of the vehicle. An approaching
vehicle will be detected if their
vehicle speed is within 4 km/h ~ 36
km/h (2.5 ~ 22.5 mph).
Note that the detecting range may
vary under certain conditions. As
always, use caution and pay close
attention to your surroundings
when backing up your vehicle.
Warning type
■ Left
■ Right
OOSEV058032OOSEV058033
If the vehicle detected by the sensors
approaches your vehicle, the warn-
ing chime will sound, the warning
light on the outside rearview mirror
will blink and a message will appear
on the LCD display.

Advertisement

Table of Contents
loading

Table of Contents