Hyundai Kona Electric 2018 Owner's Manual page 539

Maintenance
Turn signal lamp
1. Open the hood.
2. Disconnect the negative battery
cable.
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7-60
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
6. Install the socket into the assem-
bly by aligning the tabs on the
socket with the slots in the assem-
bly.
7. Push the socket into the assembly
and turn the socket clockwise.
OOSEV078023
Type B
(1) Static lamp (Low beam assist)
(2) Headlamp (Low/High)
(3) Daytime running light (DRL)/
Position lamp
(4)Turn signal lamp
OOSEV078025