Hyundai Kona Electric 2018 Owner's Manual page 181

Hide thumbs Also See for Kona Electric 2018:

Table of Contents

Convenient features of your vehicle

3. Go to the front of the vehicle, raise

the hood slightly, push the second-

ary latch up (1) inside of the hood

center and lift the hood (2).

4. Pull out the support rod.

5. Hold the hood opened with the

support rod (3).

Grasp the support rod in the

area wrapped in rubber. The

rubber will help prevent you

from being burned by hot

The support rod must be

inserted completely into the

hole provided whenever you

inspect the motor compart-

ment. This will prevent the

hood from falling and possi-

bly injuring you.

Closing the hood

1. Before closing the hood, check the

• All filler caps in motor room must

be correctly installed.

• Gloves, rags or any other com-

bustible material must be removed

from the motor compartment.

2. Return the support rod to its clip to

prevent it from rattling.

3. Lower the hood halfway (lifted

approximately 30cm from the

closed position) and push down to

securely lock in place. Then double

check to be sure the hood is secure.

If the hood can slightly be raised, it

is not securely locked. Open it

again and close it with more force.

Chapters

Table of Contents