Forward Collision-Avoidance Assist - Lane-Change Oncoming Function (If Equipped With Fca); Function Operation - Hyundai Kona Electric 2018 Owner's Manual

Driving your vehicle
FORWARD COLLISION-AVOIDANCE ASSIST - LANE-CHANGE ONCOMING FUNCTION
(IF EQUIPPED WITH FCA)
The Forward Collision-Avoidance
Assist-Lane-Change
function detects the oncoming vehi-
cle with a front view camera at the
front windshield. And it assists the
driver's steering to help avoid colli-
sion with an oncoming vehicle and
keep the vehicle within the lanes,
when the vehicle drives over the cen-
treline.
WARNING
• This function is only a supple-
mental system. So, it does not
replace the need for extreme
care and attention of the driv-
er. The sensing range of
oncoming vehicles is limited.
Pay attention to the road con-
ditions at all times.
• Always drive cautiously to
prevent accidents from any
unexpected or sudden situa-
tions. The function does not
steer the vehicle completely
and is not a collision avoid-
ance system.
5-110

Function operation

Oncoming
Driver can activate or deactivate the
function from the User Settings
mode:
'User settings → Driver assistance
→ FCA (Forward Collision Avoidance
Assist)'
For more details, refer to "LCD
Display Modes" in chapter 3.
Warning message and function
control
OOSEV058079L
• With FCA in activation, the warning
message "Emergency Steering"
appears on the LCD display with
an audible warning when:
- The vehicle speed is over 60
km/h and the vehicle crosses the
centreline when an oncoming
vehicle approaches.
• Additionally, the system provides
steering assistance to return the
vehicle back into the lane.