Lka Operation - Hyundai Ioniq EV 2020 Owner's Manual

LKA operation

■ Type A
■ Type B
To activate/deactivate the LKA system:
With the ignition switch in the ON
position, press the LKA system but-
ton located on the instrument panel
on the left hand side of the steering
wheel. (Right hand side of the steer-
ing wheel for RHD vehicles.)
The indicator (
display will initially illuminate white.
This indicates the LKA system is in
the READY but NOT ENABLED state.
If you press the LKA button located
on the instrument panel on the lower
left hand side of the driver, LKA will
be turned off and the indicator on the
cluster display will go off.
Note that the vehicle
speed must be at least
OAEE059049L
approximately 60 km/h
(40 mph) to ENABLE the
LKA system. The indica-
tor in the cluster display
will illuminate green.
- White : Sensor does not detect lane
markers or vehicle speed is
under 60 km/h (37 mph).
- Green : Sensor detects lane mark-
ers and the system is able
OAEE049681L
to control vehicle steering.
i
Information
If the indicator (white) is activated from
the previous ignition cycle, the system
will turn ON without any additional con-
trol. If you press the LKA button again,
the indicator on the cluster goes off.
LKA system operation
) in the cluster
• To see the LKA screen on the LCD
display in the cluster, select Driving
Assist mode (
mation, refer to "LCD Display
Modes" in chapter 3.
OAEE059122L
5
). For more infor-
5-65