Hyundai Kona Electric 2018 Owner's Manual page 540

Hide thumbs Also See for Kona Electric 2018:

Table of Contents

Static lamp (Low beam assist)

1. Open the hood.

2. Disconnect the negative battery

3. Remove the bulb cover by turning

it counterclockwise.

4. Remove the bulb socket from the

headlamp assembly by turning it

counterclockwise

5. Disconnect the bulb socket-con-

6. Reinstall in the reverse order of

Handle halogen bulbs with

care. Halogen bulbs contain

pressurized gas that will pro-

duce flying pieces of glass

that could cause injuries if

Wear eye protection when

changing a bulb. Allow the

bulb to cool down before han-

• Always handle them carefully, and

avoid scratches and abrasions. If

the bulbs are lit, avoid contact with

• Never touch the glass with bare

hands. Residual oil may cause the

bulb to overheat and burst when lit.

• A bulb should be operated only

when installed in a headlamp.

• If a bulb becomes damaged or

cracked, replace it immediately

and carefully dispose of it.

Chapters

Table of Contents