Detecting Sensor - Hyundai Elantra 2019 Owner's Manual

Hide thumbs Also See for Elantra 2019:
Table of Contents

Advertisement

Driving your vehicle
CAUTION
The driver should always use
extreme caution while operat-
ing the vehicle, whether or not
the warning light on the out-
side rearview mirror illumi-
nates or there is a warning
alarm.
Playing the vehicle audio sys-
tem at high volume may offset
the
Blind-Spot
Collision
Warning
system
sounds.
If any other warning sound
such as seat belt warning
chime is already generated,
the
Blind-Spot
Collision
Warning (BCW) system warn-
ing may not sound.
5-86

Detecting sensor

■ Rear radar
warning
The rear radars are the sensors
inside the rear bumper for detecting
the side and rear areas. Always keep
the rear bumper clean for proper
operation of the system.
The system may not work
properly when the bumper
has been damaged, or if the
rear
bumper
replaced or repaired.
OAD058031N
CAUTION
has
been
The sensing range differs
somewhat according to the
width of the road. When the
road is narrow, the system may
detect other vehicles in the
next lane.
The system may turn off due to
strong electromagnetic waves.
Always keep the sensors clean.
NEVER arbitrarily disassemble
the sensor component nor
apply any impact on the sensor
component.
Be careful not to apply unnec-
essary force on the radar sen-
sor or sensor cover. If the sen-
sor is forcibly moved out of
proper alignment, the system
may not operate correctly. In
this case, a warning message
may not be displayed. Have the
vehicle inspected by an author-
ized HYUNDAI dealer.
Do not apply foreign objects
such as a bumper sticker or a
bumper guard near the radar
sensor or apply paint to the
sensor area. Doing so may
adversely affect the perform-
ance of the sensor.

Advertisement

Table of Contents
loading

Table of Contents