Table of Contents
Advertisement
2.2. Chassis Safety Standards
When designing the chassis interface connectors, take care that the connectors fulfil the IEC60950 standard.
mITX-BDW-U (T4006) users must evaluate the end-product to ensure that the requirements of the 60950-1 safety
standard are met:
The motherboard must be installed in a suitable mechanical, electrical and fire enclosure.
The system, in its enclosure, must be evaluated for temperature and air flow considerations.
The motherboard must be powered by a CSA or UL approved power supply that limits the maximum input current
to 10A via external barrel-type 19 VDC connector, and to 16 A via internal square 12 VDC ATX connector.
For interfaces having a power pin such as external power or fan, ensure that the connectors and wires are
suitably rated. All connections from/to the product shall be with SELV circuits only.
Wires have suitable rating to withstand the maximum available power.
The enclosure of the peripheral device fulfils the fire protecting requirements of IEC60950.
www.kontron.com
mITX-BDW-U – User Guide, Rev. 1.6
// 12
Advertisement
Table of Contents
