Kontron mITX-BDW-U User Manual page 84

Hide thumbs Also See for mITX-BDW-U:

Table of Contents

mITX-BDW-U – User Guide, Rev. 1.6

Note 1 ) When not Disabled the System Temperature readout will only be valid if the sensor

is physically connected to the Feature connector.

Note 2) Two sets of settings (Fan Cruise Control, Fan Settings, Fan Min limit, Fan Max limit),

one set for System Fan and one set for CPU Fan. The Fan Cruise Control is by default

Disabled for System Fan and by default Thermal for CPU Fan.

Note 3) If Fan Cruise Control is Thermal, use either digit keys to enter value or +/- keys to

increase/decrease value. Don't use mix of digit keys and +/- keys.

Note 4) RPM (if Fan Cruise Control is Speed) use either digit keys to enter value or +/- keys

to increase/decrease value by 100. Don't use mix of digit keys and +/- keys.

Note 5) Only visible if Fan Cruise Control is Thermal.

Note 6 ) Use number keys to enter value.

Note 7) Use digit keys to enter value. Value 0 means Watchdog is disabled. Refer to "KT-API-

V2 User Guide" to control the Watchdog via API or refer to "KT-API-V2 User Guide DLL", How

to control Watchdog via Windows DLL.

www.kontron.com

// 84

Table of Contents