3/ System Specifications; Component Main Data - Kontron mITX-BDW-U User Manual

Hide thumbs Also See for mITX-BDW-U:
Table of Contents

Advertisement

3/ System Specifications

3.1. Component Main Data

The table below summarizes the features of the mITX-BDW-U embedded motherboard.
Form Factor
mITX-BDW-U: miniITX (170.18 mm by 170.18 mm), height approx. 23 mm from top of PCB board.
Processor
On board CPU variants Support 5th Generation Intel® Core™ (Broadwell-U Mobile) processors on a
BGA 1168 in a Multi-chip package with the PCH (max. 15 W TDP)
Intel® Core™ i7
Intel® Core™ i5
Intel® Core™ i3
Memory
DDR3L, SO-DIMM 204-pin socket (2 sockets)
Support single and dual ranks DDR3L 1333/1600 MT/s
(PC3-10600/PC3-12800)
Support system memory from 1x 1 GB up to 2x 8 G
ECC not supported
Chipset
Intel Series 9 PCH-LP (Platform Controller Hub)
Intel ® VT-d (Virtualisation Technology for Directed I/O)
Intel ® TXT (Trusted Execution Technology)
Intel ® HD Audio Technology
Intel ® RST (Rapid Storage Technology)
SATA (Serial ATA) 6 Gb/s
USB revision 2.0
USB revision 3.0
PCI Express revision 2.0
ACPI 4.0a compliant
Triple Display support (Triple Graphic Pipes)
Blue-ray HD video playback
Enhanced DMA controller, interrupt controller and timer functions
Audio
Audio, 5.1 Channel High Definition Audio Codec using the Realtek ALC662 codec
Line-in and Line-out
Microphone: MIC1 and MIC2
SPDIF-Out (electrical Interface only)
On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)
Video
Intel ® i3, i5 & i7 5th Generation Mobile processors support 3x digital display ports via the Intel®
Broadwell-U CPU:
2x DP (DisplayPorts), comply with DisplayPort 1.2a specification.
HDMI panel support via DP to HDMI Adapter Converter.
LVDS panel support up to 2 pixel/clock 24 bit colors (VESA and JEIDA)
Triple independent pipes for Mirror or Triple independent display support
Triple independent pipes for triple independent or cloned displays are supported from OS. Any 3
displays via DP1, DP2 and LVDS can be used.
I/O Control
Via ITE IT8528E Embedded Controller via LPC Bus interface
Peripheral
Four USB 3.0 / USB 2.0 on I/O area
interfaces
Four USB 2.0 ports on internal pinrows
Two Serial ports (RS232) on internal pinrows
Two Serial ATA-600 (one further SATA port implemented in M.2 connector)
RAID 0/1 support
www.kontron.com
Less than 4 GByte displayed in System Properties using 32 bit OS
(Shared Video Memory/PCI resources is subtracted).
mITX-BDW-U – User Guide, Rev. 1.6
// 14

Advertisement

Table of Contents
loading

Table of Contents