Kontron mITX-SKL-S-H110 User Manual
Kontron mITX-SKL-S-H110 User Manual

Kontron mITX-SKL-S-H110 User Manual

Embedded mitx desktop motherboard
Table of Contents

Advertisement

Quick Links

USER GUIDE
mITX-SKL-S-H110
Doc. Rev. 1.4
Doc-ID: 1061-1165

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mITX-SKL-S-H110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kontron mITX-SKL-S-H110

  • Page 1  USER GUIDE mITX-SKL-S-H110 Doc. Rev. 1.4 Doc-ID: 1061-1165...
  • Page 2 – Rev. 1.4 This page has been intentionally left blank...
  • Page 3 Kontron with respect to technical processes described in the manual or any product characteristics set out in the manual. Kontron assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright or mask work rights to these products and makes no representations or warranties that these products are free from patent, copyright or mask work right infringement unless otherwise specified.
  • Page 4: Revision History

    If you have any difficulties using this guide, discover an error, or just want to provide some feedback, please contact Kontron support. Detail any errors you find. We will correct the errors or problems as soon as possible and post the...
  • Page 5: Symbols

    Do NOT touch! Allow to cool before servicing. This symbol indicates general information about the product and the user manual. This symbol also indicates detail information about the specific product configuration. This symbol precedes helpful hints and tips for daily use. www.kontron.com // 5...
  • Page 6: Table Of Contents

    6.18. SATA (Serial ATA) Disk Interfaces (internal) ..........................36 BIOS ........................................37 7.1. Starting the uEFI BIOS ..................................... 37 7.2. Setup Menus ......................................38 7.2.1. Main Setup Menu ....................................38 List of Acronyms ......................................54 About Kontron ........................................55 www.kontron.com // 6...
  • Page 7 – Rev. 1.1 www.kontron.com // 7...
  • Page 8: List Of Tables

    Table 7: Pin Assignment DP Connector ..............................25 Table 8: Signal Description ................................... 25 Table 9: Pin Assignment ....................................26 Table 10: Signal Description ..................................26 Table 11: Navigation ......................................37 Table 12: Main Setup Menu Sub-Screens and Functions ........................38 www.kontron.com // 8...
  • Page 9: List Of Figures

    Figure 35: BIOS Chipset Menu Screen Boot Display ..........................50 Figure 36: BIOS Chipset Menu Screen LAN ............................... 51 Figure 37: BIOS Security Menu Screen Password ..........................52 Figure 38: BIOS Security Menu Screen Boot Configuration ....................... 53 www.kontron.com // 9...
  • Page 10: 1/ Introduction

    All configuration and setup of the CPU board is either done automatically or manually by the user via the BIOS setup menus. Latest revision of this manual, datasheet, thermal simulations, BIOS, drivers, BSP’s (Board Support Packages), Mechanical drawings (2D and 3D) can be downloaded from Kontron Web Page. www.kontron.com // 10...
  • Page 11: 2/ Description

     PCI Express x16 and mPCIe for expansion Built with these functions, mITX-SKL-S/H110 Mother Board is ideal for ATM, automation, multi-media, gaming, Kiosk, medical equipment, industrial automation, financial automation, process control, semiconductor equipment, and network security markets. www.kontron.com // 11...
  • Page 12: 3/ Installation Procedure

    Refer to the “BIOS Configuration / Setup“ section of this manual for details on BIOS setup. To clear all BIOS settings, including Password protection, activate “Load Default BIOS Settings” Jumper for more than 10 sec (without power connected). www.kontron.com // 12...
  • Page 13: Requirements Iec60950-1

    Product Number Part Name Length (mm) 1061-6709 USB 2.0 cable 1061-6746 LED switch cable 1061-6748 SATA cable 1061-6750 15-Inverter 1061-6752 LVDS cable CABLE BUNBLE - mITX BOARD H110 Chipset Including following cables: 1061-6709 1061-6746 1061-6748 1061-6750 1061-6752 www.kontron.com // 13...
  • Page 14: Lithium Battery Precautions

    Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. • VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan lalteval- mistajan suosittelemaan tyyppiln • • Hävitä käytetty paristo valmistajan ohjeiden mukaisesti www.kontron.com // 14...
  • Page 15: 4/ System Specifications

    1 x RS-232/422/485 D-SUB 9-Pin Ports for COM1 1 x RS-232 D-SUB 9-Pin Ports for COM2 COM1 and COM2 Pin 9 Selection for 5 V/12 V/RI , 5 V and 12 V ( Max. : 1 A output with Fuse ) www.kontron.com // 15...
  • Page 16 DP/LVDS 1920x1200 @ 60 Hz, 24 bpp (One panel display) HDMI 4096x2160 @ 24 Hz, 24 bpp (One panel display) Ethernet LAN1: Intel® I219LM(Jacksonville) 10/100/1000 Gigabit Ethernet PHY with AMT11.0 Controller LAN2: Intel® I211AT10/100/1000 Gigabit Ethernet Controller www.kontron.com // 16...
  • Page 17 20-pin ATX Power connector, Danger of explosion if the lithium battery is incorrectly replaced. • Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer’s instructions • www.kontron.com // 17...
  • Page 18: Table 4: Environmental Conditions

    Storage -20°C~80°C (-4°F~176°F); lower limit of storage temperature is defined by specification restriction of on-board CR2032 battery. Board with battery has been verified for storage temperature down to -40 C by Kontron. Up to 95% relative humidity (non-condensing) Radiated Emissions All Peripheral interfaces intended for connection to external equipment are EMI protected.
  • Page 19: Block Diagram

    – Rev. 1.1 4.2. Block Diagram Figure 1: Block Diagram www.kontron.com // 19...
  • Page 20: 5/ Jumpers And Connectors

    MINI-PCIE Mini PCIe Connector PCIEx16X PCIe x16 3.0 Connector SPI_SOCKET Bios Socket SATA1 SATA3.0 Connector Standard SATA2 SATA3.0 Connector Standard SATA3 SATA3.0 Connector Standard BAT1 Battery Socket CR2032 compatible DIMM1 Memory Socket Slot DIMM2 Memory Socket Slot www.kontron.com // 20...
  • Page 21: Mainboard Placement And Rear I/O Locations

    Battery holder 13 Front Panel connector Memory connector 14 COM-Ports CPU socket 15 USB 3.0 4x/Ethernet 2x Buzzer 16 HDMI/VGA CPU Fan connector 17 Display Port PCIe x16 Graphics 18 Audio jacks LCD Backlight control 10 Speaker connector www.kontron.com // 21...
  • Page 22: Rear Side

    – Rev. 1.1 5.3. Rear Side Figure 3: Rear Side www.kontron.com // 22...
  • Page 23: 6/ Pin Definitions

    Pull U/D On-board pull-up or pull-down resistors on input pins or open-collector output pins. Note Special remarks concerning the signal. Designation Type and number of item described see Section Number of section in this manual containing detailed description www.kontron.com // 23...
  • Page 24: Processor Support

    6th generation Intel® Core i7, -i5, -i3 Quad Core processor  Intel® Pentium G4400 and Celeron Core processor Kontron has defined the board versions as listed in the following table, so far all based on Embedded CPUs. Table 6: Processor Support Name...
  • Page 25: Ethernet Connectors (I/O Area)

    In MDI crossover mode, this pair acts as the BI_DD+/- pair. MDI[3]+ / MDI[3]- In MDI mode, this is the fourth pair in 1000Base-T, i.e. the BI_DD+/- pair. In MDI crossover mode, this pair acts as the BI_DC+/- pair. www.kontron.com // 25...
  • Page 26: Usb Connectors (I/O Area)

    Polyvinyl Chloride (PVC) Jacket On-Twisted Power Pair: Red: V Black: Power Ground Twisted Signaling Pair: White: D- Green: D+ Inner Shield Aluminum Metallized Polyester Outer Shield ≥ 65% Interwoven Tinned Copper Braid 28 AWG Tinned Copper Drain Wire www.kontron.com // 26...
  • Page 27: Figure 7: Usb 3.0 High Speed Cable

    For SuperSpeed rates it is required to use a USB cable, which is specified in USB3.0 standard: Figure 7: USB 3.0 High Speed Cable UTP Signal Pair Filler, optional SDP Signal Pair Braid Jacket Power SDP Signal Pair Ground www.kontron.com // 27...
  • Page 28: Audio Jack Connectors (I/O Area)

    , 30 kΩ Ring LINE1_R 1.0 V , 30 kΩ Sleeve Pin Designation Signal Type Note Ring Sleeve Signal Description Note LINE1_L Line In signal Left LINE1_R Line In signal Right Front_L Line Out Left Front_R Line Out Right www.kontron.com // 28...
  • Page 29: Fan Connectors (Internal)

    +12 V supply for fan. A maximum of 2000 mA can be supplied from this pin. TACHO Tacho input signal from the fan, for rotation speed supervision RPM (Rotations Per Minute). PWM output signal for FAN speed control. www.kontron.com // 29...
  • Page 30: Front Panel 1 (Internal)

    Figure 10: FP1 Connector Description Description HD LED+ Power LED- HD LED- Power LED+ Power Button Reset Button 6.8. USB1, USB2 (internal) Figure 11: USB Internal Connector Description Description 5V Dual 5V Dual USBa- USBb- USBa+ USBb+ www.kontron.com // 30...
  • Page 31: Com3/Com4 (Internal)

    Data Carrier Detect, indicates that the modem or data set has detected the data carrier. Ring Indicator, indicates that the modem has received a ringing signal from the telephone line. Figure 13: Available Cable Kit (DB9 adapter cables) PN 821017 - 100 mm / PN 821016 - 200 mm www.kontron.com // 31...
  • Page 32: Com9_Sw1/2 Internal

    Description Description COM pin9 COM pin9 COM pin9 The COM9 5V supply is fused with 2.5 A resettable fuse. 6.11. GPIO Internal Figure 15: GPIO Internal Connector Description Description GPIO5 GPIO1 GPIO6 GPIO2 GPIO7 GPIO3 GPIO8 GPIO4 www.kontron.com // 32...
  • Page 33: Case_Open Internal

    – Rev. 1.1 6.12. CASE_OPEN Internal Figure 16: CASE_OPEN Internal Connector Description CASE_OPEN_N 6.13. CMOS1 Internal Figure 17: CMOS1 Internal Connector Description 3V_BATT RTCRST# 6.14. SPK Internal Figure 18: SPK Internal Connector Description www.kontron.com // 33...
  • Page 34: Lcd_Pwr1 Internal

    – Rev. 1.1 6.15. LCD_PWR1 Internal Figure 19: LCD_PWR1 Internal Connector Description LCD_VOLTAGE 3.3V 6.16. LCD_CTL Internal Figure 20: LCD_CTL Internal Connector Description LCD BACKLIGHT ENABLE www.kontron.com // 34...
  • Page 35: Lvds (Internal)

    – Rev. 1.1 6.17. LVDS (internal) Figure 21: LVDS Connector Description Description LA_DATA0_N LA_DATA1_N LA_DATA0_P LA_DATA1_P LA_DATA2_N LA_CLOCK_N LA_DATA2_P LA_CLOCK_P LA_DATA3_N LB_DATA0_N LA_DATA3_P LB_DATA0_P LB_DATA1_N LB_DATA2_N LB_DATA1_P LB_DATA2_P LB_CLOCK_N LB_DATA3_N LB_CLOCK_P LB_DATA3_P LVDS_I2C_CK LVDS_I2C_DAT LCD_VOLTAGE LCD_VOLTAGE www.kontron.com // 35...
  • Page 36: Sata (Serial Ata) Disk Interfaces (Internal)

    SATA* TX+ / TX- Host transmitter differential signal pair SATA* RX+ / RX- Host receiver differential signal pair “*” specifies 0 or 1 depending on SATA port. Figure 23: Available Cable Kit PN 821035 Cable SATA 500 mm www.kontron.com // 36...
  • Page 37: 7/ Bios

    The <ESC> key is used to exit a major Setup menu and enter the Exit Setup menu. Pressing the <ESC> key in a sub-menu causes the next higher menu level to be displayed. <RETURN> The <RETURN> key is used to execute a command or select a submenu. www.kontron.com // 37...
  • Page 38: Setup Menus

    Read only field. Displays information about Intel Management Engine (ME) version TXE Information Read only field. Displays information about TXE information Firmware Code version and firmware information information System Date Set System Date System Time Set System Time www.kontron.com // 38...
  • Page 39: Figure 24: Bios Main Menu Screen System Date And Time

    Figure 24: BIOS Main Menu Screen System Date and Time FEATURE OPTIONS DESCRIPTION System Date [dd/mm/yyyy] Set the Date. Use Tab to switch between Data elements. System Time [hh:mm:ss] Set the Time. Use Tab to switch between Time elements. www.kontron.com // 39...
  • Page 40: Figure 25: Bios Advanced Menu Screen Acpi

    Suspend button is pressed. [S3 only(Suspend to RAM)] Restore AC [Power On], [Power Select AC power state when power is re-applied after a power failure. Power Loss Off] Watch Dog [Disabled] , [Enabled] Enable / Disable WDT function function www.kontron.com // 40...
  • Page 41: Figure 26: Bios Advanced Menu Screen Tpm

    Your Computer will reboot during restart in order to Operation change State of Security Device. Select the Hash policy to use. SHA-2 is most secure but Hash Policy [Sha-1] , [Sha-2] might not be supported by all Operating Systems www.kontron.com // 41...
  • Page 42: Figure 27: Bios Advanced Menu Screen Wake System

    [Disabled] , [Enabled] Enable or disable System wake on alarm event. Select Wake system with FixedTime, system will wake on the hr::min::sec specified. Fixed Time Select DynamicTime: System will wake on the current time + Increase minute(s) www.kontron.com // 42...
  • Page 43: Figure 28: Bios Advanced Menu Screen Ivt

    – Rev. 1.1 Figure 28: BIOS Advanced Menu Screen IVT FEATURE OPTIONS DESCRIPTION When enabled, a Virtual Machine Monitor (VMM) can utilize the Intel [Enabled] , [Disabled] additional hardware capabilities provided by Vanderpool Technology. Virtualization Technology www.kontron.com // 43...
  • Page 44: Figure 29: Bios Advanced Menu Screen Usb

    Figure 29: BIOS Advanced Menu Screen USB FEATURE OPTIONS DESCRIPTION Legacy USB [Enabled] , [Disabled] Enables Legacy USB support. Auto option disables legacy support if no Support USB devices are connected. Disable option will keep USB devices available only for EFI applications. www.kontron.com // 44...
  • Page 45: Figure 30: Bios Advanced Menu Screen Serial Port

    Enable or Disable Serial Port (COM) Select an optimal settings for Super IO Device Change [IO=3F8h; IRQ=4;] , Settings [IO=2F8h; IRQ=4;] , [IO=3E8h; IRQ=4;] , [IO=2E8h; IRQ=4;] [RS232] , [RS485] , Device Mode [RS422] RS485 Mode [Input] , [Output] www.kontron.com // 45...
  • Page 46: Figure 31: Bios Advanced Menu Screen Serial Port

    Figure 31: BIOS Advanced Menu Screen Serial Port FEATURE OPTIONS DESCRIPTION Enable or Disable Serial Port (COM) Serial Port [Enabled], [Disabled] Select an optimal settings for Super IO Device Change Settings [IO=2F8h; IRQ=3;] , [IO=3F8h; IRQ=3;] , [IO=3E8h; IRQ=3;] , [IO=2E8h; IRQ=3;] www.kontron.com // 46...
  • Page 47: Figure 32: Bios Advanced Menu Screen Serial Port

    Figure 32: BIOS Advanced Menu Screen Serial Port FEATURE OPTIONS DESCRIPTION Serial Port [Enabled] , [Disabled] Enable or Disable Serial Port (COM) Select an optimal settings for Super IO Device Change [IO=3E8h; IRQ=11;] , Settings [IO=2E8h; IRQ11;] , [IO=2F0h; IRQ=11;] , [IO=2E0h; IRQ=11;] www.kontron.com // 47...
  • Page 48: Figure 33: Bios Advanced Menu Screen Serial Port

    Figure 33: BIOS Advanced Menu Screen Serial Port FEATURE OPTIONS DESCRIPTION [Enabled] , [Disabled] Serial Port Enable or Disable Serial Port (COM) Select an optimal settings for Super IO Device Change [IO=2E8h; IRQ=10;] , Settings [IO=3E8h; IRQ10;] , [IO=2F0h; IRQ=10;] , [IO=2E0h; IRQ=10;] www.kontron.com // 48...
  • Page 49: Figure 34: Bios Advanced Menu Screen Cpu Fan Mode

    [Full on Mode] , [Automatic Mode] , [Manual Mode] Chassis Intrusion Detect [Disabled] , [Enabled] Clear Chassis Open Status [No] , [Yes] Chassis Open Alarm Type [Message] , [Beep] , [Both] Digital I/O Control [Disabled] , [Enabled] www.kontron.com // 49...
  • Page 50: Figure 35: Bios Chipset Menu Screen Boot Display

    Select LVCD panel used by Internal Graphics , Device by selecting the appropriate setup item. [AUO-G104STN01.0 800x600], [AUO-G121XTN01.0 1024x768] , [AUO-G156XW01.3 1366x768] , [AUO-G170ETN01_V0 1280x1024] , [AUO-G185XW01 V2 1366x768] , [AUO-G190ETN01.2 1280x1024] [8 bit] , [6 bit] LVDS Color Depth www.kontron.com // 50...
  • Page 51: Figure 36: Bios Chipset Menu Screen Lan

    Controller [Enabled] , [Disabled] Azalia HD Control Detection of the HD-Audio device. Disabled = HDA will be Audio unconditionally disabled Enabled = HDA will be unconditionally enabled Auto = HDA will be enabled if present, disabled otherwise. www.kontron.com // 51...
  • Page 52: Figure 37: Bios Security Menu Screen Password

    – Rev. 1.1 Figure 37: BIOS Security Menu Screen Password FEATURE OPTIONS DESCRIPTION Administrator Password Administrator Password www.kontron.com // 52...
  • Page 53: Figure 38: Bios Security Menu Screen Boot Configuration

    Reset system setup without saving any changes. and Reset Restore Defaults Restore/Load Default values for all the setup options. Launch EFI Shell Attempts to Launch EFI Shell application (Shell.efi) from from device one of the available filesystem devices www.kontron.com // 53...
  • Page 54: List Of Acronyms

    Error Checking and Correction Hard Disk mITX Mini ITX PCIe PCI-Express PECI Platform Environment Control Interface Real Time Clock SELV Safety Extra Low Voltage Serial Peripheral Interface Trusted Platform Module UEFI Unified Extensible Firmware Interface Virtual Machine Monitor www.kontron.com // 54...
  • Page 55: About Kontron

    – Rev. 1.1 About Kontron Kontron, a global leader in embedded computing technology and trusted advisor in Internet of Things (IoT), works closely with its customers, allowing them to focus on their core competencies by offering a complete and integrated portfolio of hardware, software and services designed to help them make the most of their applications.

Table of Contents