6/ I/O-Area Connectors; Dp Connectors Dp1 And Dp2 (J8, J9) - Kontron mITX-BDW-U User Manual

6/ I/O-Area Connectors

6.1. DP Connectors DP1 and DP2 (J8, J9)

The DP (DisplayPort) connectors are based on standard DP type Foxconn 3VD51203-H7JJ-7H or similar.
Display Port Connector Pinout
Signal
Pin
1 Lane 0 (p)
2 GND
3 Lane 0 (n)
4 Lane 1 (p)
5 GND
6 Lane 1 (n)
7 Lane 2 (p)
8 GND
9 Lane 2 (n)
10 Lane 3 (p)
11 GND
12 Lane 3 (n)
13 Config1
14 Config2
15 Aux Ch (p)
16 GND
17 Aux Ch (n)
18 Hot Plug
19 Return
20 3.3 V
www.kontron.com
Description
Aux or DDC selection
(Not used)
Aux Channel (+) or DDC Clk
Aux Channel (-) or DDC Data
mITX-BDW-U – User Guide, Rev. 1.6
Type Note
LVDS
PWR
LVDS
LVDS
PWR
LVDS
LVDS
PWR
LVDS
LVDS
PWR
LVDS
I Internally pull down (1 MΩ).
Aux channel on pin 15/17 selected as
default (when NC)
DDC channel on pin 15/17, If HDMI adapter
used (3.3 V)
O Internally connected to GND
AUX (+) channel used by DP
DDC Clk used by HDMI
PWR
AUX (-) channel used by DP
DDC Data used by HDMI
I Internally pull down (100 KΩ).
PWR Same as GND
PWR Fused by 1.5 A resetable PTC fuse.
// 27