For Your Safety - Kontron K393 Series Technical Manual

Feature Overview

For Your Safety

Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its
compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life
expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
Therefore, in the interest of your own safety and of the correct operation of your new Kontron product, you are
requested to conform with the following guidelines.
High Voltage Safety Instructions
As a precaution and in case of danger, the power connector must be easily accessible. The power connector is the
product's main disconnect device.
Warning
CAUTION
All operations on this product must be carried out by sufficiently skilled personnel only.
Electric Shock!
CAUTION
Before installing a non hot-swappable Kontron product into a system always ensure that your
mains power is switched off. This also applies to the installation of piggybacks. Serious electrical
shock hazards can exist during all installation, repair, and maintenance operations on this
product. Therefore, always unplug the power cable and any other cables which provide external
voltages before performing any work on this product. Earth ground connection to vehicle's
chassis or a central grounding point shall remain connected. The earth ground cable shall be the
last cable to be disconnected or the first cable to be connected when performing installation or
removal procedures on this product.
www.kontron.com
Technical Manual - Alderlake-N Mini-ITX Industrial series
3