Setting(1/2) - Panasonic AK-UCU600P Operating Instructions Manual

SETTING(1/2)

This is the selection screen for the SETTING(1/2) menu.
Item Setting value
COMPOSITE/PM PM
NORMAL
ANALOG
1-OUT
PROMPT
2-IN
RETURN FS
ON
OFF
TRUNK1 RS422
RS232C
TRUNK2
MONO SW ON
OFF
HD BAR SELECT STD
SMPTE
ARIB
EIAJ
SPLIT
HD BAR LPF OFF
3TAP
5TAP
7TAP
9TAP
HD BAR USER1
75%WHITE
100%WHITE
+I_SIGNAL
-I_SIGNAL
HD BAR USER2 0%BLACK
+Q_SIGNAL
SETTING(1/2)
COMPOSITE/PM
ANALOG PROMPT
RETURN FS
TRUNK1
TRUNK2
MONO SW
HD BAR SELECT
BAR LPF
BAR USER1
BAR USER2
Set the signal to be output from [VBS PM OUT] connector.
● PM :
Output the picture monitor images.
● NORMAL :
Output the main line images.
● When [SDI OUT8] is set to [NORMAL] in the [OUTPUT FORMAT] menu, this will be fixed at [PM]
to maintain the [SDI OUT8] or [COMPOSITE/PM] output picture monitor display.
Set input/output for the [ANALOG PROMPT1 IN] and [ANALOG PROMPT2 IN/OUT] connectors.
● When [1-OUT] is selected, the signal input to the [ANALOG PROMPT1 IN] connector becomes
the loop-through output. Apply termination on the connected device.
Set the delay mode for the HD return signals.
Set the TRUNK1 line send/receive format of the [TRUNK] connector.
Set the TRUNK2 line send/receive format of the [TRUNK] connector.
Set CCU output video to monochrome.
Set the color bar signal for output with the HD signal.
Set the filter to be applied to the color bar signal output with the HD signal.
Set user selection 1 for when [ARIB] has been selected as the [HD BAR SELECT] setting.
Set user selection 2 for when [ARIB] has been selected as the [HD BAR SELECT] setting.
- 60 -
PM
1-OUT
OFF
RS422
RS422
OFF
SMPTE
9TAP
100%WHITE
0%BLACK
___ indicates factory default settings.
Setting details
CCU menu