Image] Screen - Panasonic AK-UCU600P Operating Instructions Manual

[Image] screen

[Video over IP] tab
The JPEG image and H.264 image settings as well as the settings related to image quality are selected on this screen.
Initial display settings for "Live" page
Set initial display settings for the [Live] screen.
Item
Stream
Refresh interval (JPEG)
Image quality (JPEG)
Setting value
H.264 (1) Select the type of images to display in the [Live] screen.
H.264 (2)
H.264 (1)
H.264 (3)
Display videos (H.264(1)).
H.264 (4)
H.264 (2)
JPEG (1)
Display videos (H.264(2)).
JPEG (2)
JPEG (3)
H.264 (3)
Display videos (H.264(3)).
H.264 (4)
Display videos (H.264(4)).
JPEG (1)
Display still images (JPEG(1)).
JPEG (2)
Display still images (JPEG(2)).
JPEG (3)
Display still images (JPEG(3)).
● 59.94 Hz Set the frame rate for JPEG images.
1fps
● The frame rate may be slower than the specified value
2fps
depending on the network environment, resolution, image quality,
3fps
simultaneous access count, etc.
5fps
● If images are not transmitted at the specified frame rate, lowering
6fps* 1
the resolution or image quality may result in transmissions closer
10fps* 1
to the specified value.
15fps* 1
30fps* 1
*1: When [H.264 transmission] is set to [On], the frame rate may be
● 50 Hz
1fps
2fps
5fps
10fps*
1
12.5fps*
1
25fps*
1
Quality1 When displaying JPEG images in the Live screen, set the quality of
Quality2 the first image.
Quality1
Image quality 1
Quality2
Image quality 2
- 103 -
___ indicates factory default settings.
Setting details
slower than the specified value in some cases.
Web Screen