Panasonic AK-UCU600P Operating Instructions Manual page 88

SD CARD
This is the selection screen for the SD CARD menu.
Setting
Item
value
DATA SAVE -
DATA LOAD
-
LOG FILE -
DOWNLOAD
UPDATE -
CARD FORMAT
-
Data Stored/Loaded
The following data is stored/loaded.
● Items in the [OPERATION] menu
● Items in the [MAINTENANCE] menu
(The [NETWORK] menu, [VERSION] menu, [SYSTEM] menu, and [SD CARD] menu are excluded.)
● Items in the [SYSTEM] menu
SD Card Error Messages
When an error occurs during processing of SD card menu items, the following messages are displayed.
Messages
LOAD ERROR
WRITE ERROR
S D CARD
D AT A SAVE
D AT A LOAD
L OG F ILE DOWNLOAD
U PD AT E
C AR D FORMAT
Save the unit's setting information to memory card.
When you select this, the execution confirmation screen (NO?, YES?) appears.
Load the unit's setting information saved in memory card to this unit.
When you select this, the execution confirmation screen (NO?, YES?) appears.
Save CCU (this unit) log information to memory card.
When you select this, the execution confirmation screen (NO?, YES?) appears.
Upgrade the unit's software or programs (FPGA) with files saved to the memory card.
When you select this, the execution confirmation screen (NO?, YES?) appears.
Initialize the memory card.
When you select this, the execution confirmation screen (NO?, YES?) appears.
● Initialization may take about 5 minutes.
● Be sure to execute initialization after confirming the data because any data that is deleted by the
initialization cannot be recovered.
Unable to read from the memory card.
● Data written with other than this unit cannot be read.
Unable to write to the memory card.
● The memory card is likely to be defective.
Replace the memory card.
Setting details
Content and remedy
- 88 -
CCU menu
___ indicates factory default settings.