Front Panel 3 - Panasonic AK-UCU600P Operating Instructions Manual

Front panel 3

1 [MENU] button
2 [SELECT] dial
3 [USER1] and [USER2] buttons
4 [ROP FRONT/REAR] selector
switch
5 [ROP] connector (front)
6 Memory card slot
7 Memory card access lamp
When you hold down the [MENU] button, the menu screen is displayed on the picture monitor
and the [MENU] button lights.
If you hold down the [MENU] button while the menu is displayed, the menu closes and the [MENU]
button turns off.
"Menu operations" (see page 40)
This jog dial is for menu screen operations.
When the [SELECT] dial is turned clockwise, the cursor moves down; conversely, when it is
turned counterclockwise, the cursor moves up.
Press the [SELECT] dial to select the menu items.
"Menu operations" (see page 40)
These buttons are used for assigning functions.
Function assignments are selected using [SETUP] in the CCU menu.
The following functions are pre-assigned at the factory.
[USER1] button: CHARA
[USER2] button: LOCK
"SETUP" (see page 77)
This switch switches between the [ROP] connectors on the front and rear panels.
This is enabled when [MAINTENANCE] > [SETUP] > [ROP SW] is set to [SWITCH SELECT] in
the CCU menu.
"ROP SW" (see page 78)
This connector is for connecting a ROP (sold separately).
Insert a memory card (sold separately).
A memory card can be used to set this unit.
"SD CARD" (see page 88)
This is lit while the memory card is being accessed.
- 23 -
Parts and their functions
1 6 4
7
5
2 3