Panasonic AK-UCU600P Operating Instructions Manual page 94

3. Press the [Enter] key.
The web screen appears.
The [Live] screen is displayed initially. You can switch to the [Setup] screen when necessary.
"Switching the [Live] screen or [Setup] screen" (see page 95)
NOTE
● If the personal computer does not have the plug-in viewer software already installed, an installation confirmation message is
displayed before the [Live] screen is displayed. In a case like this, follow the on-screen instructions to install the software. [Windows]
"Installing the plug-in viewer software" (see page 92)
● When "User auth." (see page 110) is set to [On], the user name and password input screen is displayed before the [Live] screen
appears.
The default settings for the user name and password are as follows.
User name: admin
Password: 12345
● While the initial settings remain used for the user name and password, a message prompting the user to change the user name
and password is displayed after authorization. In order to ensure security, the password for the user name of "admin" must be
changed without fail. It is also recommended that the password be changed at regular intervals.
● When an attempt is made to display multiple H.264 images on one personal computer, IP videos may not be displayed depending
on the performance of the personal computer concerned. [Windows]
● When an item which is underlined on the screen is clicked, a separate window opens, and an input example is displayed.
● Up to 14 users (consisting of users receiving H.264 images and users receiving JPEG images) can access the unit at the same
time. However, depending on the settings for the [Bandwidth control (bit rate)] and [Max bit rate (per client)], the number of users
who can access the unit may be limited to less than 14. A message indicating the access limit will appear if the number of users
exceeds 14. When [Transmission type] is set to [Multicast port] for [H.264], the second and subsequent users receiving H.264
images will not be counted toward the total access count.
● When "H.264 transmission" (see page 105) is set to [On], H.264 images are displayed. When it is set to [Off], JPEG images will
be displayed. JPEG images can be displayed even when [H.264 transmission] is set to [On]. In such cases, however, the maximum
frame rate for JPEG images will be 5 fps. [Windows]
● The frame rate for JPEG images may be slower depending on the network environment, performance of your personal computer,
subject of the video, and access volume.
<Frame rate for JPEG images>
When [H.264 transmission] is [On]: Maximum 5 fps
When [H.264 transmission] is [Off]: Maximum 30 fps
- 94 -
Web Screen