Panasonic AK-UCU600P Operating Instructions Manual page 37

Status displays (page 6 of 7)
Item
HD TRUNK/TICO
COMPOSITE
Status displays (page 7 of 7)
Item
BUTTON ASSIGN USER1
BUTTON ASSIGN USER2
ROP SW
HOURS CCU
CABLE OPEN
CABLE SHORT
CAM RECEIVE LEVEL
CCU RECEIVE LEVEL
VERSION
6/7 -Status6-
HD TRUNK/TICO
COMPOSITE
Display range
HD TRUNK The signal to be output from the [HD TRUNK OUT] connector is displayed
TICO here.
PM The signal to be output from the [VBS PM OUT] connector is displayed
NORMAL here.
7/7 -Status7-
BUTTON ASSIGN
USER1
USER2 MENU/USER1 LOCK
ROP SW
HOURS CCU
CABLE OPEN
CABLE SHORT
CAM RECEIVE LEVEL
CCU RECEIVE LEVEL
VERSION xx.xx-xxx-xx.xx
Display range
NONE The function assigned to the [USER1] button is displayed here.
CHARA
BARS
CLEAN
NONE The function assigned to the [USER2] button is displayed here.
CHARA
MENU/USER1 LOCK
BARS
CLEAN
FRONT ONLY This displays the operating status (front/rear) of the [ROP] connectors.
REAR ONLY
SWITCH SELECT
******H Cumulative CCU operating time is displayed here.
(Off) This item flashes when the optical fiber multi cable is not connected.
(Off) This item flashes when the optical fiber multi cable is short-circuited.
■■■■■ The level of the optical signals received by the camera is displayed in 5
gradations.
■■■■■ The level of the optical signals received by the unit is displayed in 5
gradations.
- - - The unit's software version is displayed here.
- 37 -
HD TRUNK
PM
Remarks
CHARA
REAR ONLY
****** H
Remarks
Picture monitor (PM)