Panasonic AK-UCU600P Operating Instructions Manual page 109

Item
Multicast port
Multicast TTL/HOP Limit
Setting value
1024 to 37004 to 50000
1 to 16 to 254
- 109 -
Setting details
Enter the multicast port number (used when sending images from
the unit).
This needs to be set when [Transmission type] is set to [Multicast
port].
● Only even numbers can be specified.
● The port number cannot be set to 10670.
Enter the TTL/HOP Limit value for multicast.
This needs to be set when [Transmission type] is set to [Multicast
port].
● When transmitting H.264 images via the Internet, transmitted
images may not appear depending on proxy server settings,
firewall settings, etc. In such cases, consult your network
administrator.
● When displaying multicast images on a personal computer with
multiple LAN cards installed, disable the LAN cards that are not
used for reception.
Web Screen