Panasonic AK-UCU600P Operating Instructions Manual page 111

Item
Access level
User check
[Host auth.] tab
Click the [Host auth.] tab of [User mng.] screen.
Configure the host authorization settings that restrict the personal computers (IP addresses) that can access the unit.
Item
Host auth.
IP address
Access level
Host check
Setting value
1. Administrator
2. Live only
Setting value
On
Off
1. Administrator
2. Live only
- 111 -
Setting details
Select one of the following settings as the user access level.
● 1. Administrator
This access level allows the user to perform all the unit's
operations.
● 2. Live only
This access level enables only [Live] screen to be displayed. The
unit cannot be operated or set.
You can view registered users by clicking [ ] for [User check].
A registered user is indicated in the form of "Registered user name
[Access level]." (Example: admin[1])
You can delete selected users by clicking the [Delete] button at the
right.
Setting details
Set whether to perform host authorization.
On
Perform host authentication.
Off
Do not perform host authentication.
The IP address of the personal computer from which access to the
unit is allowed is input here.
The host name cannot be input as the IP address.
● When the "IP address/subnet mask length" is input, the
personal computers which are allowed to access the camera
can be restricted on a subnet by subnet basis. If, for instance,
"192.168.0.1/24" has been input and the [1. Administrator] setting
has been selected as the [Access level] setting, the personal
computers from "192.168.0.1" to "192.168.0.254" will be able to
access the camera at the [1. Administrator] access level.
● When an already registered IP address is input and the [Set]
button is clicked, the host information will be overwritten.
Set the host access level.
1. Administrator
This access level allows the user to perform all the unit's
operations.
2. Live only
This access level enables only [Live] screen to be displayed. The
unit cannot be operated or set.
You can view registered host IP addresses by clicking [ ] for [Host
check].
A host is indicated in the form of "Registered IP address [Access
level]."
(Example: 192.168.0.21 [1])
You can delete selected hosts (IP addresses) by clicking the [Delete]
button at the right.
Web Screen
___ indicates factory default settings.