Out Format(Uhd) - Panasonic AK-UCU600P Operating Instructions Manual

OUT FORMAT(UHD)

This is the selection screen for the OUT FORMAT (UHD) menu.
Item Setting value
SDI OUT1-4 UHD
SDI OUT1 UHD(12G)
UHD(6G)
SDI OUT1-4
SDI OUT2
SDI OUT1-4
SDI OUT3
SDI OUT1-4
SDI OUT4
SDI OUT5&6
3G
HD
SDI OUT7
SDI OUT8 HD
SDI OUT8 PM
NORMAL/PM NORMAL
OUTPUT FORMAT INTERLEAVE
SQUARE
3G SDI LEVEL-A
LEVEL-B
OUT FORMAT(UHD)(1/2)
SDI OUT1-4
SDI OUT1
SDI OUT2
SDI OUT3
SDI OUT4
SDI OUT5&6
SDI OUT7
SDI OUT8
NORMAL/PM
OUTPUT FORMAT
3G SDI
HD SDI FORMAT
OUT FORMAT(UHD)(2/2)
HD TRUNK/TICO
Displays the format of the signals to be output from [1] to [4] of the [UHD/HS/HD SDI OUT]
connectors.
● The content selected in SDI OUT1-4 is displayed for the items of SDI OUT1-4. When there
is no output, "no signal" will be displayed.
"Output selection conditions" (see page 54)
Set the format of the signals to be output from [5] to [7] of the [HD SDI OUT] connectors.
"Output selection conditions" (see page 54)
Set the format of the signals to be output from [8/PM] of the [HD SDI OUT] connector.
"Output selection conditions" (see page 54)
Set the signal to be output from [8/PM] of the [HD SDI OUT] connector.
PM :
Output the picture monitor images.
NORMAL :
Output the main line images.
Set the format (INTERLEAVE/SQUARE) of the UHD signals to be output from [1] to [4] of the
[UHD/HS/HD SDI OUT] connectors.
When [CCU MODE] is [2160/29.97psF], [2160/23.98psF], [2160/25psF] or
[2160/23PsF & over59]:
SQUARE (fixed)
Set the output format for 3G output.
- 53 -
UHD(12G)
UHD(12G)
UHD(12G)
no signal
no signal
3G
3G
HD
PM
SQUARE
LEVEL-A
1080i
HD_TRUNK
___ indicates factory default settings.
Setting details
CCU menu