Re-Placing Filter Bag - Craftex CX series User Manual

must be checked and emptied regularly.
The machine operates at a much higher
level of efficiency when the collection
drawer is empty. Emptying the drawer is
very simple and easy.
Make sure the switch is in the OFF position
and the cord is disconnected from the
power source.
Open the cabinet door and pull the drawer
out using the handle. See figure-9.
Figure-9 Emptying collection drawer
Empty the drawer, slide it back in place and
close the cabinet door.
REPLACING THE FILTER
BAG
To replace the filter bag on CX403, make
sure the switch is the OFF position and the
cord is disconnected from the power
source.
Remove the bag clamp securing the bag to
the dust collector. Once the clamp is
removed, the bag will come off.
Replace the bag with a new one and tighten
the clamp to secure the new filter bag to the
dust collector. See figure-10.
Figure-10 Replacing filter bag
10