Table of Contents
Advertisement
IMPELLER
The impeller screw might get loosened with
use after a period of time. Check the
impeller once a month to ensure that
impeller screws are tight, securing the
impeller on the shaft.
Make sure the machine is turned off and
the cord is disconnected from the power
source.
Access the impeller screws through the
inlet cover on the machine and tighten to
secure the impeller on the shaft.
MACHINE STORAGE
When the dust collector is not in use,
disconnect the cord from the power source
and store the machine in a dry place. Do
not expose the machine to rain. Make sure
to keep the cord away from potential
damage sources such as; sharp objects,
chemicals, heat sources and water.
EMPTYING COLLECTION
BAG
The collection bag on your dust collector
must be checked and emptied regularly.
The machine operates at a much higher
level of efficiency when the collection bag is
empty.
The CT167 features a collection bag with a
clear window and a bottom zip. The clear
window allows operator to see the amount
of dust in the bag and the bottom zip makes
bag-emptying easy.
11
Advertisement
Table of Contents
