SY115C9/135C/155H Crawler Hydraulic Excavator
3. Remove the fi ller cap (F) and fi ll the oil as
required through the fi ller opening (F).
4. Check the oil level. For more information
see "Swing drive oil - check/refi ll" on
page 5-80.
5. For information on selection of oil and tem-
perature see "Recommended Fluids"
on page 5-17.
5.8.7.3 Engine exhaust pipe clamps - check
Consult Sany distributor to check the fastening
conditions of the air cleaner - turbocharger -
post cooler - engine clamps.
5.8.7.4 Fan belt tension - check/replace
Check the tension of fan belt. Replace the fan
belt in case of cracks or damage. Contact your
Sany distributor if you have any troubles.
5.8.7.5 Nitrogen pressure in accumulator
(breaker) - check
(If equipped)
Special tools will be used in order to check the
accumulator and inject nitrogen.
Please consult Sany distributor, if possible, to
conduct related inspection and infl ating opera-
tion.
Safety, Operation and Maintenance Manual - Aug 2012
F
G
Fig. 5-96
Maintenance
CZ135B-1104027
5-85