Table of Contents
Advertisement
Exhaust Regeneration
01
The regen will stop and the Regen Inhibit light will illuminate on the display.
The machine can now be moved to a safe area to allow the process to continue.
* DO NOT inhibit regens unnecessarily.
* All inhibits are recorded within the machine ECU.
* Multiple inhibits will lead to a service regen being required or may result in damage to the
exhaust system. Damage caused in this way is NOT covered by warranty.
01
02
02
The machine will run an auto regen as
required to clear soot from the exhaust
system.
For the regen to commence the machine
must meet certain parameters with regards
to temperature.
When the Auto Regen light illuminates
continue to work the machine normally until
the regen has completed.
A regen can be inhibited in the event that
carrying out the process with high exhaust
temperatures may cause a health and safety
concern, for example the machine is working
next to flammable material.
To inhibit the regen press the Inhibit switch
on the front right hand softkey pad.
04
Advertisement
Table of Contents
