Transportation; Loading And Unloading The Machine - SANY SY115C9 Safety, Operation And Manitenance Manual

Safety
LOCK position.
7. Remove ignition key.
8. Close the windows and the cab door.
9. Lock all access doors, boxes and cham-
bers.
When leaving your machine, face the machine
and maintain a three-point contact with it. Nev-
er jump off the machine.
Be careful with slippery track, step and hand-
holds when dismounting the machine.

2.4.4 Transportation

2.4.4.1 Loading and unloading the machine

Improper loading and unloading of the ma-
chine may cause it to fall or tip over. Follow
the procedures below:
● Load or unload the machine only on a solid
and flat surface. Keep it a safe distance
away from road sides or a cliff.
● Keep on-lookers away.
● Use an access ramp with enough strength.
Make sure that the width, length and thick-
ness of the access ramp is capable of pro-
viding a safe loading/unloading operation
(at an angle ≤ 15°).
● Make sure the access ramp is free from
grease, oil, water and debris. Clean the
track if necessary. Be extremely careful
when loading or unloading the machine in
rainy or snowy weather.
● Never load or unload the machine using
the force of work equipment, which may
cause the machine to fall or tip over.
● Run the engine at low speed and drive
slowly.
2-52 Safety, Operation and Maintenance Manual - Sep 2012
SY115C9/135C/155H Crawler Hydraulic Excavator
Fig. 2-76
Fig. 2-77
Locked
CZ335-1102057
Max. Angle 15°
Blocks
CZ335-1102058