Fire Extinguisher; In Case Of Fire; Crushing Hazard; Diesel Engine Exhaust - SANY SY60C Operation And Maintenance Manual

SAFETY

Fire Extinguisher

Always keep a fire extinguisher on the machine. Read
the instructions on the fire extinguisher carefully and
know how to use it in an emergency.
Inspect the condition of the fire extinguisher daily. If
damaged, replace the extinguisher immediately.
Make sure the fire extinguisher is within the listed
inspection period. Replace the fire extinguisher
immediately if it has reached its expiration date.
The fire extinguisher must be at least a 2.5 lb. Class ABC
rated fire extinguisher (National Fire Protection
Association [NFPA] 10 Standard for Portable Fire
Extinguishers).

In Case of Fire

If a fire occurs on the machine:
1. Immediately stop and shut down the machine. Never
continue operating the machine.
2. Get clear of the machine and immediately call for
help. Always have a list of emergency phone
numbers available.
3. Exit the area and remain clear of the machine until
the fire response team gives permission to come
near the machine.
4. If using a fire extinguisher, always aim the
extinguisher nozzle at the base of the fire.

Crushing Hazard

Keep your body inside the windows and door during
operation or travel.
Keep all guards in place on the machine.
Never remove the side window of the machine. If this
window becomes damaged or broken, replace it
immediately.
Block off the area where the machine is being operated
and keep all unnecessary personnel out of the work area.

Diesel Engine Exhaust

CALIFORNIA PROPOSITION 65 WARNING
Diesel engine exhaust and some of its
constituents are known to the State of California
to cause cancer, birth defects, and other
reproductive harm.
Engine exhaust fumes can cause sickness or
death. If it is necessary to run an engine in an
enclosed area, use an exhaust pipe extension to
vent the exhaust to the outdoors. If an exhaust
pipe extension is not available, open doors and
use fans to supply fresh air into the area.

Machine Decals

All safety and warning decals must be in place,
undamaged, and visible. Become familiar with the
location and content of all decals on the machine. Walk
around the machine and review each of them. Decals
provide important instructions and warnings and must be
read and understood prior to any operational or
maintenance function.
Contact a SANY dealer for replacement decals if needed.
NOTE: When replacing decals, make sure they are
placed in the proper locations. Contact a SANY
dealer if you have any questions about their
meaning and placement.
2-4
WARNING
WARNING
SY60C Excavator OMM