Gps Monitoring Information - SANY SY115C9 Safety, Operation And Manitenance Manual

System Functions

3.3.2.14 GPS Monitoring Information

Displaying GPS monitoring information.
Screen output
1. Real-time display of GPS monitoring
information.
2. Press [F5] to return to the "Main Menu".
Keypad input
[F5]: Return to the "Main Menu".
[ESC]: Return to the "Main Menu".
Remark:
1. In this section the letter "E" stands for East Longitude and "W" for West Longitude.
2. The letter "N" stands for North Latitude and "S" for South Latitude.
3. The letter "P" stands for the height above the seal level and "N" for the height below the
seal level.
4. The signal-to-noise ratio ranges from 0 to 99, which is indicated by a bar. The value on the
right of the bar is real S/N ratio.
5. If the elevation value is not zero and no value is displayed for the longitude and latitude, GPS
data are being received but the location has not been precisely defi ned yet.
6. When the communication signal is 1023, GPRS communication is regular. When it is 615, the
GPRS communication is abnormal.
7. When the communication signal changes from 7 to 0, the SIM card or the antenna has a bad
connection.
8. When the communication signal changes from 15 to 0, GPRS service is not available, the SIM
card has insuffi cient fund, or GPRS network is abnormal.
9. When the communication signal changes from 31 to 0, the monitoring center is closed.
3-26 Safety, Operation and Maintenance Manual - Aug 2012
SY115C9/135C/155H Crawler Hydraulic Excavator
1
Fig. 3-24
GPS Monitoring Info
121.0W
Longitude °
31.40N
Latitude °
28.79P
Elevation m
4.037
Speed Km/h
0006
Number of satellites
1023
Communication signal
S/N 1:
S/N 2:
S/N 3:
S/N 4:
dB
dB
dB
dB
2
XP1351106019